XINHUI GARMENTS / CUSTOM MEN’S STREETWEAR
CUSTOM MESH JERSEY
& SHORTS SET.
Develop a custom mesh jersey & shorts set for your streetwear label. Forest-green mesh and angular cream inserts connect a wide short-sleeve jersey with baggy shorts. Define both garments around your fabric, fit, artwork and size-pairing requirements.
Xinhui Garments is an OEM/ODM streetwear manufacturer in Humen, Dongguan, China, serving brands in Europe, North America, Australia and other international markets.
Custom production only. No ready stock or dropshipping. Detailed quotes follow review of your drawings or tech pack. For sets, state top and bottom piece counts; set composition and minimums are confirmed in the quote. Images are AI-generated design concepts, not physical production samples.
FRONT VIEW / DESIGN
MESH TEXTURE.
ORIGINAL LINES.
Forest mesh with an original angular cream route.
01 / 06
Basketball references with an original panel layout.
Forest-green mesh and angular cream inserts connect a wide short-sleeve jersey with baggy shorts. A small rust-colored geometric detail adds a finishing accent without using team names, numbers or borrowed insignia. The broad sleeves and knee-length lower half create a complete streetwear silhouette built around the panel construction.
DESIGN DIRECTION
An oversized short-sleeve V-neck jersey with an original angled cream chest panel, paired with baggy knee-length mesh shorts with related side inserts, cream drawcord and a restrained rear pocket.
MATERIAL DEVELOPMENT
A mesh-knit direction in forest green with compatible cream panels, collar trim and an opaque shorts inner layer. Confirm fiber content, mesh structure, weight and lining choice during sampling.
BACK VIEW / DETAILS
SPACE
ON THE REVERSE.
Quiet green areas balance the stronger front inserts.
02 / 06
Keep the reverse clean and readable.
The rear jersey leaves the mesh surface mostly uninterrupted, with a restrained upper-back detail rather than a duplicate chest panel. The shorts use a quiet rear-pocket treatment. Review how panel transitions meet at side seams, and specify any back artwork independently so it stays clear of openings and pocket construction.
BACK & INTERIOR
Draw the rear neckline, panel transitions and shorts pocket separately from the front layout.
SAMPLE CHECK
Mesh distortion, lining opacity, collar recovery, insert alignment, embroidery support, pocket attachment and relative movement of shorts shell and inner layer.
FIT STUDY / 03
WIDE JERSEY.
BAGGY SHORTS.
- JERSEY EASEDefine chest and sleeve volume.
- V-NECK DEPTHApprove the opening on-body.
- KNEE POSITIONSet the shorts length.
- INNER LAYERReview length and movement.
03 / 06
Balance jersey volume with short length.
An oversized mesh jersey needs deliberate chest and sleeve measurements, not just a larger size label. Confirm neckline depth and body length against the shorts waistband, then review rise, leg opening and knee position. Assess the complete set with the proposed shorts inner layer so the final silhouette reflects its actual construction.
TWO SIZE CHARTS
Jersey: chest, shoulder, body length, sleeve, armhole and V-neck depth. Shorts: waist, hip, rise, inseam, outseam, opening and inner-layer dimensions. Mark panel and embroidery positions.
SIZE PAIRING
Specify the intended top and bottom size pairing and quantities for each piece. Review the full outfit on-body; record finished measurements for both garments before bulk approval.
DEVELOPMENT SPECIFICATION
- Top & bottom measurements
- Jersey: chest, shoulder, body length, sleeve, armhole and V-neck depth. Shorts: waist, hip, rise, inseam, outseam, opening and inner-layer dimensions. Mark panel and embroidery positions.
- Material direction
- A mesh-knit direction in forest green with compatible cream panels, collar trim and an opaque shorts inner layer. Confirm fiber content, mesh structure, weight and lining choice during sampling.
- Construction
- An oversized short-sleeve V-neck jersey with an original angled cream chest panel, paired with baggy knee-length mesh shorts with related side inserts, cream drawcord and a restrained rear pocket.
- Sample review
- Mesh distortion, lining opacity, collar recovery, insert alignment, embroidery support, pocket attachment and relative movement of shorts shell and inner layer.
- Quantity basis
- MOQ starts from 50 pieces. For two-piece sets, specify top and bottom quantities separately; set composition and minimums by style and color are confirmed in the quotation.
- Branding & packing
- Provide artwork for each piece, label positions and whether the garments should be paired in one pack. Confirm packing and size identification before bulk.
Development options, not fixed specifications. Confirm both garments, materials, measurements and size pairing on your samples.
MATERIAL & CRAFT / 04
MESH.
SUPPORT.
INNER LAYER.
- MESH SUPPORTAvoid distortion at decoration.
- SHORTS LININGCheck opacity and comfort.
- PANEL JOINSReview seams across materials.
04 / 06
Support decoration without closing the mesh.
Mesh openings affect how seams, inserts and embroidery behave. Test attachment methods and support on the selected fabric, checking for distortion and uncomfortable bulk. For the shorts, review inner-layer opacity, hem position and movement against the outer shell. Functional claims such as moisture management require an agreed material specification and evidence.
MATERIAL CHOICE
A mesh-knit direction in forest green with compatible cream panels, collar trim and an opaque shorts inner layer. Confirm fiber content, mesh structure, weight and lining choice during sampling.
SET CONSISTENCY
Mesh distortion, lining opacity, collar recovery, insert alignment, embroidery support, pocket attachment and relative movement of shorts shell and inner layer.
ON-BODY / 05
COURT ROOTS.
STREET PROPORTION.
Court-inspired materials in a broader streetwear proportion.
05 / 06
Show volume beyond the court reference.
Neutral footwear and a naturally worn street setting make the green-and-cream set read as a fashion direction. The wider leg and broad jersey sleeves remain visible from a lower angle. A second pose helps explain the intended ease, while samples confirm the mesh handle, lining comfort and freedom of movement.
COLLECTION CONTEXT
Review the short inner layer when seated and in motion, as well as in the standing front view.
CONCEPT IMAGERY
These AI-generated images illustrate an original development direction, not physical samples or ready-stock items. The approved physical samples define the production garments.
YOUR BRIEF / 06
YOUR PANELS.
YOUR MESH BRIEF.
- 01 / BOTH PIECESFront, back and construction drawings.
- 02 / SIZE PAIRINGTop and bottom size charts and ratios.
- 03 / MATERIALSFabric, shade, artwork and trims.
- 04 / QUANTITIESPiece counts, set packing and timing.
06 / 06
Provide the mesh, lining and panel brief.
Send front and back drawings for both pieces, panel colors, mesh references, shorts lining requirements and separate size charts. Include original embroidery, trim details, packing and top/bottom quantities. We review material and attachment choices before quotation, then approve complete samples and any agreed testing before the bulk order.
QUANTITY & SAMPLING
MOQ starts from 50 pieces. For two-piece sets, specify top and bottom quantities separately; set composition and minimums by style and color are confirmed in the quotation. Sample lead time is 7–20 days for the agreed development scope; revisions and bulk schedules are confirmed separately.
APPROVAL BEFORE BULK
Approve both pieces, color relationship, fit, decoration, trims, labels and packing before bulk production. Confirm any required product testing and report scope for the project.
BEFORE YOU SEND YOUR BRIEF
Are the shorts lined?
This concept includes an opaque inner-layer direction. Confirm lining material, length and attachment during sampling; the image is not a material specification.
Is this a performance basketball uniform?
It is presented as a streetwear development concept. Any sport-specific performance requirements must be specified and reviewed separately.
Can our own artwork replace the geometric detail?
Yes. Provide original artwork and placement. We assess the application and backing on the selected mesh before approval.
HOW CUSTOM STREETWEAR ORDERS WORK
FROM YOUR DESIGN.
TO YOUR DELIVERY.
For made-to-order streetwear, the path starts with your design files. We review your requirements, quote and make a sample for your approval before you confirm a bulk order.
- 01 / INQUIRY & BRIEF
Send your design and requirements.
Share your drawings or tech pack, preferred fabric and weight, fit, artwork files, estimated quantity and target timing. We clarify missing details before pricing.
- 02 / REVIEW & QUOTE
Get a project-specific quotation.
We assess fabric, construction, decoration placement and quantity, then quote from the submitted design and specifications. We also agree on the sample scope; later design changes may affect the final price.
- 03 / SAMPLE DEVELOPMENT
See the garment in real life.
We develop a sample to check fit, fabric feel, decoration placement, color and finishing. The stated sample lead time is 7–20 days, subject to the agreed sample brief.
- 04 / SAMPLE APPROVAL
Review, revise and sign off.
You check the physical sample and send feedback. We agree any revisions, update the production specification and obtain your approval before bulk production.
- 05 / BULK ORDER
Confirm the order details.
After sample approval, confirm the final quantity, color and size breakdown, artwork placement, labels, packaging, price, payment terms and delivery schedule in the purchase order.
- 06 / PRODUCE & DELIVER
Make, inspect and ship.
We prepare materials, cut, decorate and sew the garments, with photo and video updates at key stages. Finished goods are inspected, packed and handed over under the agreed shipping terms.
Timing note: Sample revisions can add time. The 7–20 day figure is for sampling, not bulk production or shipping. We confirm the bulk schedule after sample approval and order details are agreed.
CUSTOM PRODUCTION / OEM & ODM
TELL US ABOUT
YOUR DESIGN.
Share the essentials for your mesh jersey & shorts set project: oversized mesh jersey, angular cream inserts, lined baggy shorts. State top and bottom piece counts and the intended size pairing. MOQ starts from 50 pieces; set composition and minimums are confirmed in the quote. Your answers prepare a WhatsApp draft for review. A detailed quote follows assessment of your drawings or tech pack.
After WhatsApp opens, attach any design drawings, tech pack or material references you have in the chat. Files cannot be attached through this form.